The S12E-I is a high output INFRA subwoofer system designed to provide high fidelity extended low frequency audio reproduction from a relatively small enclosure. The S12E-I provides perfectly flat response down to 8 Hertz when used in conjunction with the 8 Hertz Integrator. Designed for permanent installation, the S12E-I offers a flat black painted finish and a black coated steel grille.
SPECIFICATIONS: | |||||||
|
ACOUSTIC
AND ELECTRICAL
|
|
|||||
Enclosure: 18 mm 13-ply birch plywood Low Frequency Transducer: 12" INFRA cone 2.5" Voice coil 80 oz. Magnet Input Connectors: Cinch 142 screw terminal barrier strip Grille: 16 Gauge black vinyl coated perforated steel Optional Hardware: Rigging points |
System
Type: INFRA Sealed chamber (1.4 cu. ft.) Impedance: 8 Ohms Crossover Network: Requires INFRA Integrator Frequency Response: 8 Hz to 95 Hz +/-3 dB (2 pi Steradians, with 8 Hz Integrator) Sensitivity: 92 dB SPL @ 80 Hz (1W @ 1m) (for additional information, see INFRA Speaker Sensitivity Technical Note) Power Handling: 200 W continuous sine wave 200 W instantaneous peak |
Finish: Black paint Dimensions: 15"h x 18"w x 15"d 39 cm x 46 cm x 39 cm Weight: 39 lbs. 18 kg Shipping Dimensions: 18" x 21" x 18" 46 cm x 54 cm x 46 cm Shipping Weight: 44 lbs. 20 kg |
All Right Reserved Solid Design Audio - 2012 - - 213-330-0457 - CA Seller's Permit # 102-203204
Ecommerce Software by Shopify. Designed by PixelUnion.